UPDATE 20/02/2012

OUR NEW WEBSITE CAN BE FOUND AT

CROMARTIEHOBBYCRAFT.CO.UK

CHECK OUT THE HOME PAGE FOR LINKS TO PRODUCT INFORMATION,

TECHNICAL SUPPORT INCLUDING PDF DOWNLOADS

IF YOU HAVE ANY DIFFICULTIES CALL US ON (0)1782 319435

OR EMAIL US

THANK YOU FOR YOUR PATIENCE

Cromartie Hobbycraft Ltd

Park Hall Rd,

Longton,

Stoke on Trent

ST3 5AY

United Kingdom

Stated prices are invalid please call for a quotation.

Hardwood Modeling Tools

Traditional modeling tools, hand made from dense hard wood for a long working life.

A B C D E F G H I J

CH6000 Set of 10 Assorted Tools £12.50

CH6002/A to CH6002/J Individual Tools £ 1.25

(10 different shapes as per CH6000 set)

CH6001 Set of 4 Assorted Tools £ 5.00

Plastic Modeling Set

An excellent value set of 14 plastic modeling tools, approximately 6" long with a variety of shapes. Ideal for clay, plasticine or plaster modeling, especially useful for schools.

CH6005 Plastic Modeling Set £7.10

Potters Ribs

Hardwood Potters Ribs, finished by hand to give a smooth surface for throwing and hand-building. Approximately 100mm (4") in length.

CH6010 Concave / Flat £2.10

CH6011 Kidney £2.10

CH6013 Curved Triangle £2.10

Cut Off Needles

For trimming edges while throwing and for piercing and Sgraffito decoration.

	CH6021 Aluminum Needle £1.95

	CH6022 Fine Needle £1.35

	CH6023 Thick Needle £1.35

Clay Wires

For trimming pots while throwing, cutting pots off the wheel and for cutting clay for wedging. The smaller wires are for wheel work and will not last if used on full bags where a wedging wire should be used. The shell pattern wire is used to produce the distinctive scallop shell pattern or "Potters Thumb" on the base of the pot. Avoid bending the wedging wire.

CH6025 Cut Off Wire £1.55

CH6026 Shell Pattern Wire £1.75

CH6027 Wedging Wire £1.75

Ribbon Tools

6'’ long, double ended tools with flat metal ribbon "strip" ends that have ground cutting edges. Designed for turning, fluting, carving and sculptural techniques.

CH6030 6" Ribbon Tool £2.75

CH6031 6" Ribbon Tool £2.75

CH6033 6" Ribbon Tool £2.75

CH6032 6" Ribbon Tool £2.75

Loop Tools

Single ended strip tools for heavy duty turning and carving. Loop tools can also be used to produce coils of clay for coil building.

CH6037 ¾" Round Coiler Tool £2.35

CH6038 1" Round Coiler Tool £2.35

CH6039 1¾" Oval Loop Tool £2.35

CH6040 11/8" Triangle Loop Tool £2.35

Potters Knives

	CH6045 Long Fettling Knife £3.30
	CH6046 Traditional Potters Knife £2.70

Potters Tool Set

All the basic tools a potter needs, ideal for students use.

CH6050 Tool Set £12.50

Rubber Kidney Palettes

For use as a throwing rib, smoothing and shaping clay surfaces, as a squeegee for applying transfers and for pressing clay into press moulds.

CH6055 Small Hard Rubber Kidney £1.65

CH6056 Small Soft Rubber Kidney £1.65

CH6057 Large Hard Rubber Kidney £2.15

CH6058 Large Soft Rubber Kidney £2.15

Stainless Steel Scrapers

Made from stainless steel these scrapers can be used without fear of rust contaminating the clay. They are thin and flexible with a good sharp edge for use as throwing ribs or scraping.

CH6080 Semi Circular 37/8" £0.69

CH6081 Semi Circular 45/8" £0.69

CH6082 Kidney 37/8" £0.69

CH6083 Rectangular 4" £0.69

CH6084 Rectangular Serrated 61/4" £1.65

Blue Steel Scrapers

Traditional potters' steel scraper, "blued" for extra strength and rust resistance and having a very sharp edge.

CH6090 Small Kidney 3½" x 1¾" x 0.010" £0.67

CH6091 Large Kidney 4" x 2" x 0.010" £0.71

CH6093 Flexible Kidney 3½" x 1¾x 0.005" £0.67

CH6098 Serrated Kidney 4 x 1¾ x 0.010" £0.90

CH6099 Rectangular 5'' x 2'' x 0.010" £0.74

Turning Tools

One piece stainless steel turning tools ¾'' wide in four traditional shapes.

CH6100 Square Ended £3.35

CH6101 Round £3.35

CH6102 Leaf £3.35

CH6102 Triangle £3.35

Hole Cutters

Double ended tools for piercing perfect round holes on teapots, salt pots, etc.

CH6110 1/16" and 1/8" Holes £2.95

CH6111 1/4" and 5/16" Holes £2.95

CH6112 3/8" Hole and Small Blade £3.25

Calipers

Our calipers are made from aluminum so they do not rust and are light and durable.

Use calipers for checking measurements of thrown pieces to give uniformity and when joining pieces together or fitting lids.

CH6115 8'' Caliper £3.90

CH6116 10'' Caliper £4.15

Slip Trailer

Use for applying decorating slip, colour or glaze.

CH6120 Slip Trailer £5.50

Clay Gun

CH6125 Clay Gun & Die Set £7.70

The famous Clay Gun is used for extruding small strips of clay with 19 different dies, it is ideal for hair on animals and dolls. Make sure that the screw end is clean when replacing dies otherwise the thread may become damaged.

Forged Steel Modeling Tools

Excellent for shaping and carving clay and plaster, these modeling tools are made of high quality Sheffield Steel, and are hand forged and tempered in the traditional way.

CH6201-£7.10 CH6202-£5.85 CH6203-£4.60 CH6204-£9.05 CH6204-£9.05 CH6205-£7.20 CH6206-£5.40 CH6207-£5.60 CH6208-£6.65 CH6209-£7.40 CH6210-£7.10 CH6211-£5.35 CH6212-£5.65 CH6213-£7.10 CH6214-£5.45 CH6215-£7.00 CH6216-£5.25 CH6217-£6.35 CH6218-£6.10 CH6219-£6.15 CH6220-£8.10 CH6221-£6.55 CH6222-£7.30 CH6223-£8.00

MORE TOOLS

60 Years of trading!

Contact Information

E-mail

Telephone: 0044 (0) 1782 313947 / 319435
FAX: 0044 (0) 1782 599723
Postal address & registered office: CROMARTIE Cromartie House, Longton, Stoke-on-Trent, Staffordshire, England. ST3 5AY

[ Previous Page ] [ Up ] [ Next Page ] [ HOME ] [ MAP ]